Wuxi Houde | ST-2i Explosion-Proof Vibration Velocity Sensor Probe

The ST-2i explosion-proof vibration velocity sensor probe is a flameproof structure made according to the relevant explosion-proof standards. Its explosion-proof mark is ExidⅡCT6 Ga. The shell is made of all stainless steel and has armored cables. It is suitable for factories where there are or may be explosive hazards in Zone 1 and Zone 2 formed by the mixture of flammable gases, vapors and air of Class Ⅱ A , Ⅱ B , Ⅱ C , T1 to T6 groups .

ST-2i explosion-proof vibration velocity sensor probe technical indicators:

Explosion-proof mark: Exid ⅡCT6 Ga

Sensitivity: 20mV/mm/s ± 5%

Frequency response: 5 ~ 300Hz ± 8%

Natural frequency: about 12Hz

Amplitude limit: 2mm (peak -to -peak)

Acceleration: 10g

Installation method: vertical or horizontal

Temperature range: -30 ℃～120 ℃

Relative humidity: up to 95% without condensation, and no strong electromagnetic field interference around

Dimensions: φ 29 × 76

Installation method: Open a M10 × 1.5 , 10mm deep hole at an appropriate position on the bearing seat and fix it with a stud screw.

Weight    : Approx. 250g

Order code of ST-2i explosion-proof vibration velocity sensor probe :

ST-2FB-A □

ST-3FB-A □

Selection Instructions:

Cable length A □:

1 * —3 meters ; 2—5 meters ; 3—10 meters ;

ST-2i explosion-proof vibration velocity sensor probe

Selection examples: ST-2FB-A1; ST-2FB-A2 ; ST-2FB-A3 , ST-2FB-G1/2

Selection examples: ST-3FB-A1; ST-3FB-A2 ; ST-3FB-A3 , ST-3FB-G1/2