Yingli | JFL-072/100DVI-2F Electric Dust Collector Insulating Ceramic Shaft

Deskripsi

Electric Dust Collector Insulating Ceramic Shaft

Model : JFL-072/100DVI-2F
Treatment concentration : 5000 mg/L
Air volume handled : 600,000 m³/h
Ignition temperature : 60℃
Airspeed : 1.2
Applicable industries : Chemical, steel, power plant, cement, non-ferrous metals
Brand : YINGLI ENVIRONMENTAL PROTECTION

I. Main Technical Parameters:

1. Dielectric strength: ≥85KV (DC) 2. Minimum creepage distance: ≥520mm 3. Tensile load: Metal fittings ≥ 2.5T   Ceramic body ≥5T 4. Surface temperature of the insulating rod ( at room temperature ) ≥150℃ 5. Rated operating voltage of the glow plug: 36V (AC), other voltages can be customized.   Rated power: 250W

II. Instructions for Use:

1. The upper steel cap and the dust collector body frame should be properly grounded; 2. Before the dust collector is put into operation, the glow plug should be preheated for 1-2 hours to make the surface temperature of the ceramic body of the pull rod reach above 100℃ before the dust collector can be started. 3. It is recommended to provide your own power transformer with a power of not less than 500W per glow plug to ensure that the glow plug can work normally for a long time.