Yingli | AP04W Phase Control Board

Deskripsi

Phase Control Board

Model : AP04W
Product Name: Phase Control Board
Number of layers : Double-sided
Substrate : Copper
Insulation material : organic resin
Flame retardant properties : VO board
Brand : YINGLI ENVIRONMENTAL PROTECTION

1. Vibration Interval: 0.5–5s.  The interval between the completion of one vibrator and the next must be 0.5–5s.

※ Phase Angle: 0–255°. The phase angle corresponds to the vibration height of the electromagnetic hammer, generally between 120° and 180° (corresponding vibration height of 0–30cm or 0–45cm). The vibrator is turned off when the phase angle is zero.

※ Association: Yes/No. Power-off vibration: In associated mode, the high-voltage power supply is cut off or reduced when vibration occurs; in non-associated mode, the high-voltage power supply occurs remains unchanged when vibration. (Association can only be changed in the parameter setting menu under configuration mode.)

※ Maximum Vibration Cycle: 0–999.9min. The minimum maximum cycle value should ensure that all vibrators can vibrate at least once.

※ Start Time: 0–999.9min. Each group of vibrators has a set start time, and the start times of each group are staggered.

※ Vibration Period: 0–999.9min. 1. Time interval between two consecutive vibrations of this group of vibrators.

2. Side motor vibration parameters:
※ Side vibration cycle: 0～999.9min.
※ Start time: 0～999.9min.
※ Working time: 0～999.9min.
※ Stop time: 0～999.9min. Each motor has a set start time according to operational needs.
※ Forced: ON/OFF/AUTO: ON: Motor starts immediately; OFF: Motor stops immediately; AUTO: Motor runs according to the set sequence.

3. Correlation: Yes/No ※ Correlation advance time Ti (0～9.9 minutes): The time from the output of the vibration correlation board to the drop in high voltage.
(XX:Y): XX (0～99) represents the number of correlation interval cycles, Y represents the number of cyclic vibrations.