SHANGYI | 381(361) Linear Electronic Electric Actuator

Deskripsi

Linear Electronic Electric Actuator

Product name: 381 (361) linear electronic electric actuator
Product number: SY-10443-972
Specifications: 381 (361)
Category : Actuator – Electric actuator
Brand : Shanghai Automation Instrument

381 (361) series linear (381L) and angular (381R) actuators use AC220 single-phase AC power as power source, and accept DC4~20mA standard signals from DCS, PLC systems and other operators to control the actuator to switch valves or automatically adjust. The electronic control module uses the most advanced hybrid integrated circuit, contains complete protection functions, can be controlled on-site or remotely, is designed in the form of a box, and is sealed with resin casting. The drive feedback uses a high-performance conductive plastic potentiometer with high precision and long life. It can be combined with various angular stroke adjustment mechanisms to form a high-performance and high-reliability electric control valve. Therefore, it is widely used in industrial sectors such as metallurgy, power generation, petrochemicals, papermaking, light industry and environmental protection.

Main features of the actuator:

1. The actuator is designed with a servo system (no need to equip a servo amplifier separately), and can work by connecting a DC4~20mA (or DC1~5V) signal and an AC220V single-phase power supply. It has built-in wiring terminals, and the wiring is extremely simple and convenient.
2. The key component of the actuator, the controller, adopts the most advanced hybrid integrated circuit, which is sealed and cast with resin. It has a box-shaped appearance, small size and high reliability.
3. The feedback detection of the driving quantity adopts a high-performance conductive plastic potentiometer with a resolution of <0.4%.
4. It has a self-diagnosis function. When a fault occurs, the indicator light on the controller will immediately send an indication signal.
5. The state selection switch can be used to set the signal when it is off (the valve core is in full open, full closed or self-locking state).
6. The state selection switch can be used to set (positive and negative action).
7. The state selection switch can be used to set the input signal to (DC4~20mA or DC1~5V).
8. It is simple and easy to adjust the working zero point (starting point) and stroke (end point). 9.
When the power is suddenly cut off, it can ensure that the valve core is self-locking.
10. Synchronous belt drive is used to effectively reduce noise.
11. Delay protection function. When the rated load is reached, the state self-locking can be implemented. When a fault occurs, the protection can be started immediately, and the delay protection can be canceled by reverse operation.

Power supply: AC220±50%, 50HZ.
Power consumption (at rated load)
: 50VA for A-type actuator;
150VA for B-type actuator;
220VA for C-type actuator.
Input signal: DC4～20mA or DC1～5V.
Output signal: DC4～20mA (load resistance 500Ω or less).
Control accuracy: Basic error: ±1% Hysteresis ≤1% Dead zone ≤1%
Working stroke adjustment range: “Zero point” ±25% “Stroke” 20%～100%
External wiring: Shielded cables should be used for input and output signals. The power line shall not share the same cable with the signal line.