Wuxi Houde | ST-9268 Magnetoelectric Vibration Sensor

ST-9268 magnetoelectric vibration sensor is connected with vibration and intensity monitor (or transmitter), it can measure various displacements, speeds, etc.

The vibration of the rotor supported by ball bearings will be large enough to be transmitted to the bearing seat. The speed sensor installed on the bearing seat or very close to the bearing housing will output voltage by cutting the magnetic lines of force through the internal moving coil, and provide a signal to the monitoring instrument to predict and alarm mechanical failures.

ST-9268 magnetoelectric vibration sensortechnical indicators:

Sensitivity: 20mV/mm/s ± 5%

Frequency response: 5 ~ 300Hz ± 8%

Natural frequency: about 12Hz

Amplitude limit: 2mm (peak -to -peak)

Acceleration: 10g

Installation method: vertical or horizontal

Temperature range: -30 ℃～120 ℃

Relative humidity: up to 95% without condensation, and no strong electromagnetic field interference around

Installation method: Divide evenly on the circumference of φ 43 , and fix with 3 M5 × 20mm screws

Weight    : Approx. 185g

ST-9268 magnetoelectric vibration sensororder code:

ST-9268-A □

Selection Instructions:

Cable length A □:

1 * —3 meters ; 2—5 meters ; 3—10 meters ;

Selection example of ST-9268 magnetoelectric vibration sensor :

ST-9268-A1, ST-9268-A2, ST-9268-A3